PowerShot A640/A630 Camera User Guide Camera User Guide Advanced

67
Shooting
2
.
z The camera will switch to color
input mode and the display will
alternate between the original
image and the color swap image
(using the previously set color).
3
Aim the camera so that the original color
appears at the center of the LCD monitor
and press the button.
z Only one color can be specified.
z You can use the or button to specify the range of
colors that are swapped.
–5: Only takes the color that you want to swap.
+5: Also takes colors close to the one that you want to swap.
4
Aim the camera so that the desired color
appears at the center of the LCD monitor
and press the button.
z Only one color can be specified.
5
Press to complete the setting, then
shoot.
z The default setting for color swap mode will change
green into white.
z You may not obtain the expected results if you use the
flash.
z The colors specified in the color swap mode are
retained even if the camera’s power is turned off.
Still image