PowerShot A590 IS Camera User Guide

155
Troubleshooting
Subject in recorded image is too bright, or image
flashes white.
Subject is too close,
making the flash too
strong.
z Shoot within correct flash range of the
subject when using the built-in flash
(p. 188).
z Adjust the flash output with the flash
exposure compensation function
(p. 86).
z Set the safety FE to [On] (p. 86).
The subject is
overexposed because the
surroundings are too dark.
z Set the exposure compensation to a
negative (–) setting (p. 99).
z Use the spot metering function
(p. 100).
Too much light is shining
directly into the camera, or
is being reflected off the
subject.
z Change the shooting angle.
Flash is set to (Flash
on).
z Set the flash to (Flash off) (p. 60).
Image contains noise.
ISO speed is too high. z Higher ISO speeds and (High ISO
Auto) setting may increase image
noise. For higher image quality, use
as low an ISO speed as possible
(p. 68).
z In , , and mode in the
mode, the ISO speed increases
and noise can appear.
COPY