User Guide

63
Shooting
3
Aim the camera so that the original color
appears at the center of the LCD monitor
and press the button.
! Only one color can be specified.
! You can use the or button to specify the range of
colors that are swapped.
4
Aim the camera so that the desired color
appears at the center of the LCD monitor
and press the button.
! Only one color can be specified.
5
Press to comlete the setting, then shoot.
! The default setting for color swap mode will change green
into white.
! You may not obtain the expected results if you use the flash.
! The colors specified in the color swap mode are retained
even if the camera’s power is turned off.
–5: Only takes the color that you want to swap.
+5: Also takes colors close to the one that you want to swap.