PowerShot A480 Camera User Guide

Changing the Image Display Time
48
• The supplied memory card has already been formatted.
• When the [Memory card error] message appears, or when the camera does not
work correctly, formatting the memory card may solve the problem. Copy the
images from the memory card to a computer or other device before formatting.
You can change the length of time the images display directly after shooting.
Press the æ button and select
» (p. 20).
Display the menu.
● Press the n button.
Select [Review].
● Press the qr buttons to select the 4 tab.
● Press the op buttons to select [Review],
then press the qr buttons to select the
display time.
● If you select [Off], the image will not display.
● If you select [Hold], the image displays
until you press the shutter button halfway.
About formatting
Formatting or erasing data on a memory card merely changes the file
management information on the card and does not ensure its contents
are completely erased. Be careful when transferring or disposing of a
memory card. When disposing of a memory card, take precautions such
as physically destroying the card to prevent personal information leaks.
• The total capacity of the memory card displayed in the formatting screen
may be less than indicated on the memory card.
• Low level formatting may take longer than standard formatting, since all
recorded data are erased.
• You can stop a low level format of a memory card by selecting [Stop].
When stopping low level formatting, the data will be erased but the
memory card can be used without problem.
Changing the Image Display Time
COPY