Specifications
Table Of Contents
- Troubles in Setup/Connections
- 1 Connection checklist
- 2 Cannot connect to the access point (the access point is not detected)
- 3 How to set a network key/network password
- 4 Cannot connect to the machine (the machine is not detected)
- 5 The following screen is displayed during setup
- 6 Re-setting the machine
- 7 The admin password set to the machine was forgotten
- 8 Changing the port name
- Restoring the Machine to the Factory Settings
- Specifications

9
Minimum System Requirements
Conform to the operating system’s requirements when higher than those given here.
Operating System
Processor
RAM
Windows Vista, Vista SP1
1 GHz processor
512 MB
Windows XP SP2, SP3
300 MHz processor
128 MB
Windows 2000 Professional SP4
300 MHz processor
128 MB
Mac OS X v.10.5
Intel processor, PowerPC G5, PowerPC G4
(867 MHz or faster)
512 MB
Mac OS X v.10.4
Intel processor, PowerPC G5, PowerPC G4,
PowerPC G3
256 MB
Mac OS X v.10.3.9
PowerPC G5, PowerPC G4, PowerPC G3
128 MB
Browser Internet Explorer 6.0 or later Safari
Hard Disk Space 600 MB 700 MB
Note:
For bundled software installation. Note:
For bundled software installation.
CD-ROM Drive Required
Display XGA 1024 x 768
Windows: Note: Operation can only be guaranteed on a PC with Windows Vista, XP
or 2000 pre-installed.
Some functions may not be available with Windows Media Center
.
To upgrade from Windows XP to Windows Vista, rst uninstall software bundled with the Canon inkjet printer.
Macintosh: Hard Disk must be formatted as Mac OS Extended (Journaled) or Mac OS Extended.
•
•
•
•
Additional System Requirements for the on-screen manuals
Browser: Easy Guide Viewer Browser: Help Viewer
Note: Microsoft Internet Explorer 6.0 or later must be
installed. The on-screen manual may not be displayed
properly depending on your operating system or
Internet Explorer version. We recommend that you
keep your system up to date with Windows Update.
Note:
The on-screen manual may not be displayed properly
depending on your operating system. W
e recommend
that you keep your system up to date.
Specications are subject to change without notice.
About Consumables
Consumables (ink tanks / FINE Cartridges) are available for 5 years after production has
stopped.
Fax Specications
Applicable line Public Switched Telephone Network (PSTN)
Compatibility G3 / Super G3 (Mono & Color Fax)
Data compressing
system
MH, MR, MMR, JPEG
Modem type Fax modem
Modem speed 33600 / 31200 / 28800 / 26400 / 24000 / 21600 / 19200 / 16800 / 14400 / 12000 / 9600 / 7200 / 4800 /
2400 bps
Automatic fallback
Transmission
speed
Black & white: Approx. 3 seconds/page at 33.6 Kbps, ECM-MMR, transmitting from memory
(Based on ITU-T No.1 chart for US specications and Canon FAX Standard chart No.1 for others, both in
standard mode or Canon FAX Standard chart No.1, standard mode.)
Color: Approx. 1 minute/page at 33.6 Kbps, ECM-JPEG, transmitting from memory
(Based on Canon COLOR FAX TEST SHEET.)
Scanning image
processing
Halftones: 256 levels of gray
Density adjustment: 3 levels
Memory Transmission/reception: 250 pages
(Based on ITU-T No.1 chart for US specications and Canon FAX Standard chart No.1 for others, both in
standard mode.)
Fax resolution Black & white Standard: 8 pels / mm x 3.85 lines / mm (203 pels / inch x 98 lines / inch)
Black & white Fine, Photo: 8 pels / mm x 7.70 lines / mm (203 pels / inch x 196 lines / inch)
Black & white Extra ne: 300 x 300 dpi
Color: 200 x 200 dpi
Dialing Automatic dialing
One-touch speed dial (5 destinations)
Coded speed dial (100 destinations)
Group dial (max. 104 destinations)
Regular dialing (with Numeric buttons)
Automatic redialing
Manual redialing (with the Redial/Pause button)
Telephone
networking
TTI (Transmit Terminal Identication)
ECM transmission
Activity report (after every 20 transactions)
Sequential broadcasting (max. 106 destinations)
Manual redialing (max.10 transactions)
Automatic reception
Remote reception by telephone (Default ID: 25)
DM Preventive Function
etc.