Technical information

Basic Printing
7
 Loading Envelopes
Use either European DL or US Comm. #10 size envelopes.
The address is automatically rotated and printed out.
(3) Select Envelope
EnvelopeEnvelope
Envelope in Media Type
Media TypeMedia Type
Media Type, and then select DL Env.
DL Env. DL Env.
DL Env. or Comm. Env. #10
Comm. Env. #10 Comm. Env. #10
Comm. Env. #10 in
Page Size
Page SizePage Size
Page Size.
(4) Select Landscape
LandscapeLandscape
Landscape in Orientation
OrientationOrientation
Orientation.
For the printer driver setting, see “Printing with Windows
Printing with WindowsPrinting with Windows
Printing with Windows” on page 11, or
“Printing with Macintosh
Printing with MacintoshPrinting with Macintosh
Printing with Macintosh” on page 13.
• Do not use envelopes with embossed or treated surface, with a
double flap or pressure seals, with sticker flaps.
• Select either DL Env.
DL Env. DL Env.
DL Env. or Comm. Env. #10
Comm. Env. #10 Comm. Env. #10
Comm. Env. #10 in the printer driver
according to the envelope size you are using.
• If you do not select Media Type
Media TypeMedia Type
Media Type correctly, the print out results in the
wrong way round.
Note
• When printing the envelope, set the paper thickness lever to the
right.
• When using a special paper to inverse the print result, open the
printer properties dialog box and select the Rotate 180 degrees
Rotate 180 degreesRotate 180 degrees
Rotate 180 degrees
check box on the Page Setup
Page SetupPage Setup
Page Setup tab.
Fold the envelope flap shut.
(1) Align the envelope
against the right side of
the auto sheet feeder.
Set the envelope with its
flap facing down on the
left side.
A maximum of 10
envelopes can be loaded
at one time.
Printing direction
(2) Pinch the paper guide and slide it against
the left side of the envelope.
iP6320D_6310D_QSG_US.book Page 7 Friday, April 14, 2006 11:09 AM