Technical information

WNotes
• PictBridge-compatible digital cameras can be connected to your printer
for direct printing.
• A communication time out occurs
if printing takes a long time or if it
takes too much time to send data. This may stop printing. In such a
case, disconnect the cable between the printer and the camera, and
reconnect it. Then, turn the camera on,
if it does not automatically turn
on just by connecting the cable. If the problem is still unresolved,
select some other photo and check
if it can be printed or not.
• Depending
on the model or brand of your PictBridge compliant device,
you may have to select a
print mode before connecting the device. You
may also have to turn on the device or select Play mode manually after
connecting the device to the printer. Perform necessary operations
according to the instruction manual supplied with your device.
•
The print head nozzles may be clogged if printing becomes faint of
colors are incorrect. See "When Printing Becomes Faint or Colors are
Incorrect"
on page 35.
•
If the paper is curled or its surface is scratched during printing, make
sure that you are using the correct type
of paper. If this error occurs
even when you
are using the correct type of paper, set the paper
thickness lever to the right position.
•
To disconnect the cable connected between a digital camera and
printer, follow the procedure below.
1. Disconnect the cable from the printer.
2. Turn off the digital camera.
3. Disconnect the cable from the digital camera.
When disconnecting the cable,
be sure to hold the connector by its
sides.
•
For the errors indicated on the camera and their solution, also refer to
the user's manual
of the camera. For other troubles on the digital
camera, contact the manufacturer
of the camera.
51