Technical information

Print Head Cleaning
If white stripes are found in the printed nozzle check pattern, perform the print head
cleaning to unclog
the print head nozzles. Cleaning the print head consumes ink, so perform
the print head cleaning only when necessary.
1 Ensure that the printer is on.
2 Start print head cleaning.
(1) Press the Configuration button repeatedly to select MAINTENANCE.
(2) Use the ... ~ buttons to select CLEANING and then press the OK button.
~Important
WNote
Do not perform any other operations until the print head cleaning finishes.
This takes
about 30-50 seconds.
After print head cleaning finishes
After print head cleaning finishes, print the nozzle check pattern to verify
that the print head nozzles are clean.
See "Printing the Nozzle Check Pattern" on page 36.
If the problem remains after perform ing print head cleaning twice, try print
head deep cleaning.
See "Print Head Deep Cleaning" on page 38.
37