Technical information

3
4
About transmittable data
• It does not support printing a downloaded content or photo and a
photo attached to
an E-mail for security reason.
• It does not support
printing video files.
• Depending
on your device, it may not print data stored in a memory card.
• Depending
on the size of a photo, it may take a while for this printer
to start to
print after starting the infrared transfer.
• It automatically sets the photo quality and orientation (horizontal or
vertical) according to the photo size.
• It automatically sets to the margin according to the photo size.
• Changing the Bluetooth Settings-Bluetooth settings
You can change the Bluetooth settings such as the device name of a printer and passkey.
1 Turn on the printer.
2 Connect the Bluetooth unit BU-20 to direct print port.
W Note BlUETOOTH SET cannot be selected until the Bluetooth unit is
connected.
Press the Configuration button repeatedly to select the BLUETOOTH SET and
then press the
OK button.
Change
the setting.
Use the ~ ... buttons to select the setting item you want to change and then press the
OK button.
• Setting Items
• DEVICE NAME:
• ACCESS REFUSAL:
• SECURI1Y:
• PASSKEY:
32
Select the device name of this printer displayed on the screen of
the Bluetooth devices.
When you set
iP6310D-2, the printer name on the Bluetooth
device is "Canon iP631
00- 2".
The initial value is set to iP6310D-1.
Selecting ON will disable search for this printer from Bluetooth
devices.
Selecting
ON will enable a passkey.
Setting a passkey
will prevent incorrect access from other
Bluetooth devices.
You can change the passkey. The passkey refers to an
identification number to be determined. It is used to prevent
incorrect access from other Bluetooth devices.
The initial value is set to "0000".
After you change the passkey, you are require to enter the new
passkey again. Enter the new passkey to the Bluetooth device.