Technical information
Performing
Bluetooth
Communication
• Printing through Bluetooth communication
When
you print through Bluetooth communication from a mobile phone, refer to your mobile
phone manual.
1 Prepare to print.
(1) Confirm the printer is
ON.
(2)
Load
the paper in the auto sheet feeder
See
"Loading Paper" on page 12.
2 Connect the Bluetooth unit BU-20 to the direct print port.
3 Set the print setting.
See
"Setting
the
Page
Size, Media Type, and Layout When Printing
From
a Mobile
Phone"
on
page 29.
4 Start printing from a mobile phone.
• When you select the device name, select the
initial
value
of
this
printer "Canon
iP6310D-1".
•
If
you are required to enter the passkey, enter the
initial
value
"0000".
You
can
change the device name
of
the printer or passkey in Bluetooth settings
on
the
printer.
See
"Changing the Bluetooth Settings-Bluetooth settings"
on
page 32.
WNotes
• Communication is possible up to about ten meters depending
on
the
conditions below.
The
printing
speed may change depending
on
the
following conditions:
- Presence
of
obstacles between the communication equipment and
radio wave conditions.
- Presence
of
magnetic fields, static electricity or electromagnetic
interference.
- Receiver sensitivity and antenna performance
of
the
communication equipment.
3
1