Technical information

The following sizes and types of paper can be loaded in the printer by selecting options
from Paper Size and Paper Type.
"Paper size"
setting "Paper type" setting
Paper loaded in printer
10 x 15 cm/4" x 6"
Photo Photo Paper Plus Glossy
Fast Photo
Photo Paper
Pro
Photo
Photo Paper Plus Semi-Gloss
Photo Glossy Photo Paper
Photo
Photo Stickers*l
13 x 18 em/51! x 7"*2
Photo Photo Paper Plus Glossy
A4/8.5
11
x 1t" (Letter)*3*4
Photo Photo Paper Plus Glossy
Fast Photo Photo Paper Pro
Photo Photo Paper Plus Semi-Gloss
Photo Glossy Photo Paper
5.4 x 8.6 em/Credit
Card Photo Glossy Photo Paper
Credit
Card
*1 This paper is exclusively used to print photo stickers. When printing on sticker
paper, select
10 x 15 em/4
11
x 6
11
in Paper size.
*2 This size can be selected only for Canon PictBridge compliant devices (note that it
cannot be selected for some models).
*3 Plain Paper can be selected for Paper type when A4 or 8.5" x 11" (Letter) is selected
for Paper size. When Plain Paper is selected for Paper type, bordered
printing will be
performed even when Borderless is selected for Layout.
*4 When A4 or 8.5" x 11
11
(Letter) is selected for Paper size, you can print in 4-up layout.
• About "layout" and "Trimming"
For Layout, when you have selected Default (selections based on the printer setting),
the printer operates based
on the PictBridge setting screen.
W Note When printing onto Photo Stickers (PS-tOt) (16-up), use the following settings.
1.
Load Photo Stickers (PS-l0l) in the auto sheet feeder.
2. Select
10 x 15 em/4
11
x 6
11
for the Paper size, and Photo for the Paper
type.
3. Select N-up for Layout, then select 16.
Some PictBridge compliant devices display the
layout option; 2-up,
4-up, 9-up, and 16-up.
In this case always select 16-up.
If there are no options on the PictBridge compliant device that
correspond to 2-up, 4-up, 9-up, or 16-up, printing on stickers is not
possible.
By default, Off (No trimming) is selected for Trimming.
27