Technical information

• Confirming or Changing the Device Settings
To change the paper size or paper type, operate the device to select the PictBridge print
setup mode and confirm or change the settings.
You can change the following settings on the PictBridge setting screen displayed by
pressing Configuration button. However, changes
can be made on the PictBridge
setting screen only when the corresponding items below are in the Default (selections
based
on the printer setting) using the controls of the device.
PictBridge compliant device
setting items
Paper size: Default
Paper type: Default
Print quality: Default
Layout: Default
Image Optimize: Default
PictBridge setting items
(PICTBRIDGE SEn on
the printer
PAGE SIZE
MEDIA TYPE
PRINTQLTY
BORDERLESS PRINT
IMAGE ENHANCEMENT
You can select the page size, media type, borderless printing, and optimize on the
printer when printing from a PictBridge compliant device.
(1)
Turn on the printer.
(2) Press the Configuration button repeatedly to select the
PICTBRIDGE SET and
then press the
OK button.
(3) Confirm or change the settings.
Use the ~ ... buttons to select the item to set and then press the OK button.
About the Settings Explained Below
The settings explained on the following pages cannot be made on some devices. If any
setting cannot be made, the default setting explained above is used.
Names
of settings that are displayed on Canon PictBridge compliant devices are used
in
the description given below.
Different names may be displayed
on your device depending on the brand or model.
For details, refer to your device's instruction manual.
• About Image Data Format for Printing
This printer accepts images* taken with a camera compatible with the Design rule for
Camera File system and
PNG files.
*Exif2.21 compliant
• About "Paper size" and "Paper type"
When you have selected the Default (selections based on the printer setting), the
printer operates based
on the PictBridge setting screen.
26