Technical information

3 Ensure that the indicator lamp lights after flashing for a moment and then
close the card
slot cover.
WNotes • When OFF is selected in the READ-ONLY MODE screen, you cannot print
photos in the memory card. After using the card slot
as the memory
card drive
of the computer, remove the memory card, then be sure to
select
ON in the READ-ONLY MODE screen again. See "Setting up the
Card Slot as the Memory Card Drive of the Computer" on page 34.
•
If you have used a computer to edit or process the data stored in the
memory card, be sure to
print photos from the computer. Using the
operation panel to
print photos may result in improper printing.
Removing a Memory Card
WNote If you use the printer connected to your computer, follow the instructions
for removal
of the memory card from the computer. For the procedure, see
"Setting up the Card Slot as the Memory Card Drive of the Computer" on
page 34.
1 Open the card slot cover.
2 Ensure that the indicator lamp is not flashing, then remove the memory card.
~Important Removing the memory card or turning off the printer while the
indicator lamp is flashing
can damage the data stored in the memory
card.
3 Close the card slot cover.
11