Technical information
___________________________
AeJ?endix
Caution
You
may
cau~e
injury or damage the printer
if
you
ignore
any
of these safety
precautions.
Choosing a location
Do
not install the printer
in
a location that is unstable or subject to
excessive
vibration.
Do
not install the printer
in
locations that
are
very humid or dusty, in direct sunlight, outdoors, or
close to a heating
source.
To
avoid the risk
of
fire or electric shocks, install the printer in a location
that
has a constant
temperature range
of
5°C
to 35°C (41°F to 95°F) and humidity
of
10%
to
90%
(condensation free).
Do
not
place
the printer
on
a thick rug or carpet.
Power
supply
Ensure
that the
area
around the power outlet is kept clear at all times
so
you
can
easily unplug the power
cord
when
if
necessary.
Never
remove
the plug
by
pulling
on
the cord.
Do
not
use
an
extension lead/cord.
Working around the
printer
FINE
Cartridges (Ink
Cartridges)
Never
use
a power supply source other than the
one
rated for the printer
in
the country
of
where
you purchased the printer.
AC
100·240
V,
50/60
Hz
Never
put your
hands
or fingers
in
the printer while
it
is printing.
When
moving the printer, carry the printer at both ends.
Do
not
place
any
object
on
the printer.
Do
not
place
any
metal objects (paper clips, staples, etc.) or containers
of
flammable solvents
(alcohol, thinners,
etc.)
on
top of the printer.
Should
any
foreign object (metal or liquid) fall into the printer, unplug the power
cord
and
call for
service.
When
installing or transporting this printer,
do
not incline it, lay
it
down
on
its side, or turn
it
upside down. Ink
can
leak.
For
safety
reasons,
store
FINE
Cartridges (Ink Cartridges) out
of
the
reach
of
small children.
If
a child should ingest any ink, consult a doctor immediately.
Do
not
shake
FINE
Cartridges (Ink Cartridges).
Ink may leak out and stain clothing or the surrounding area.
Never
touch the electrical contacts or nOlzles
on
a
FINE
Cartridge (Ink
Cartridge) after printing.
The
metal parts may
be
very hot and could cause burns.
33