Technical information
~endix
A Safety Precautions
Please read the safety warnings and cautions provided in
this
manual to ensure
that
you use
your printer safely.
Do
not
attempt to use your printer in any other way than is described in
this manual.
Warning
You
may cause
an
electric
shock/fire
or damage the printer
if
you ignore any
of
~hese
safety precautions.
Choosing
a location
Power
supply
Do
not
place
the printer
close
to flammable solvents
such
as
alcohol or thinners.
Never
attempt to plug
in
or
unplug the printer
from
the
power
supply
when
your
hands
are
wet.
Always
push
the plug all the
way
into the
power
outlet.
Never
damage,
modify, stretch or
excessively
bend
or twist the power
cord.
Do
not
place
heavy
objects
on
the
power
cord.
Never
plug the printer into a power socket that
is
shared
with other
equipment (extension lead/cord,
2- or
3-
way
adapter,
etc.).
Cleaning
the printer
Maintaining the printer
Working
around
the
printer
32
Never
use
the printer
if
the
power
cord
is
bundled or knotted.
If
you
detect
smoke,
unusual smells or
strange
noises
around
the printer, immediately unplug the
printer at the power supply
and
call for
service.
Periodically, unplug
the
printer
and
use
a dry cloth
to
wipe
off
any
dust or dirt
collected
on
the plug
and
the
power
outlet.
If
the printer is placed at a location exposed to a
lot
of dust, smoke, or high
humidity, dust collected
on
the plug will absorb moisture and may cause
insulation failure and fire.
Use
a
damp
cloth to
clean
the printer.
Never
use
flammable solvents
such
as
alcohol,
benzene
or thinners.
If
flammable solvents come in contact with the electrical components inside
the printer,
it
could cause a fire or electric shock.
Always
unplug the printer
from
the power outlet before cleaning the printer.
If
you accidentally switch the printer
on
while cleaning it, you could injure yourself or damage the
printer.
Do
not attempt to disassemble or modify the printer.
There
are
no
user serviceable parts inside
the printer.
The
printer contains high-voltage components. Never attempt any maintenance procedure which
is not described in this guide.
Do
not
use
flammable
sprays
near
the printer.
This could cause a fire or electric shock
if
spray were to come in contact with the electrical
components inside the printer.