Technical information

Troubleshooting
"Error No.:
1700/1711"
The printer has a built-in ink absorber to hold the ink used during print head
cleaning, for example. This error message indicates
that this ink absorber is
nearly full.
Press the OK button to clear the error so you can continue printing. Before the
ink absorber becomes completely full, contact the Customer
Care Center.
When you experience this error, you
will need to call for servicing to replace the
ink absorber and to check the printer for proper operation.
"Error No.:
2001"
"Error No.: 2500"
A specified period
of time has elapsed
without receiving a
response from the
digital camera/The
digital camera or
digital video
camcorder
con nected is not
compatible with
this printer
Automatic print
head alignment
failed
Disconnect the camera cable, and reconnect it.
W Note Depending on the model or brand of your PictBridge compliant
device, you may have to select a print mode before connecting the
device.
You may also have to turn on the device or select Play mode
manually after connecting the device to the printer.
Perform necessary operations according
to the instruction
manual supplied with your device.
If the error is still unresolved, there is a possibility that you are using a digital
camera or
digital video camcorder that is not supported by this printer. '
PictBridge-compatible digital camera or digital video camcorder
can be
connected to your printer for Direct Printing.
Refer to "An Error Message is Displayed
on the LCD" in the Direct Printing Guide.
POWER Lamp and Alarm Lamp Flash Alternately
Problem I Possible Cause I Try This
POWER Lamp and
Alarm Lamp
Flash
Alternately
28
An error that Disconnect the printer cable from the printer, and then turn the printer off and
requires contacting unplug the printer from the power supply. Plug the printer back in and turn the
the Customer
Care printer back on after leaving it for a while.
Center may have
If the problem remains, contact the Customer Care Center.
occurred