Instruction manual

Advanced Guide
Troubleshooting
Contents
> Routine Maintenance >
When Printing Becomes Faint or Colors Are Incorrect
> Cleaning the Print Head
Deeply
Cleaning the Print Head Deeply
If print quality does not improve by standard Print Head Cleaning, clean the Print Head deeply. Print Head
Deep Cleaning consumes more ink than standard Print Head Cleaning, so clean the Print Head deeply
only when necessary.
1.
Make sure that the power is turned on.
2.
Open the printer properties dialog box.
See Opening the Printer Properties Dialog Box (Windows)
.
3. Clean the Print Head deeply.
(1)
Click the Maintenance tab.
(2)
Click Deep Cleaning.
(3)
Confirm the displayed message and click Execute.
Note
Clicking Initial Check Items displays the items to be checked before cleaning the Print Head
deeply.
(4)
Confirm the displayed message and click OK.
The printer starts cleaning the Print Head deeply when the
Power
lamp starts flashing green.
Do not perform any other operations until the printer completes the deep cleaning of the Print Head. This
takes about 1 or 2 minutes.
4.
Print the nozzle check pattern to check the print head condition.
See
Printing the Nozzle Check Pattern
.
Note
If the problem is not resolved, clean the Print Head deeply again.
If this does not solve the problem, ink may have run out. Replace the FINE Cartridge with a new
one. See
Replacing a FINE Cartridge
.
1.
Make sure that the power is turned on.
Стр. 40 из 334 стр.Cleaning the Print Head Deeply
Downloaded from ManualsPrinter.com Manuals