Instruction manual

A
dvanced Guide
>
Troubleshooting > Alarm Lamp Flashes Orange
Alarm Lamp Flashes Orange
When a printer error occurs, the
Alarm
lamp flashes orange as shown below. The number of flashes
indicates the type of error that has occurred. Count the flashes and take the appropriate action to correct
the error.
(A) Note the number of flashes
(B) Flashes repeatedly
Number of flashes/Cause
A
ction
Two flashes:
Printer is out of paper. /Paper does not
feed.
Reload paper on the Rear Tray and press the
RESUME/CANCEL
button.
Three flashes:
Paper jam.
The paper may be jammed. Remove the jammed paper,
reload paper properly in the printer, and then press the
RESUME/CANCEL
button.
Paper Jams
Four flashes:
Ink has run out.
Ink has run out.
Replace the ink cartridge and close the cover.
If printing is in progress and you want to continue printing,
press the
RESUME/CANCEL
button for at least 5 seconds
with the ink cartridge installed. Then printing can continue
under the ink out condition.
The function for detecting the remaining ink level will be
disabled.
Replace the empty ink cartridge immediately after the
printing. The resulting print quality is not satisfactory, if
printing is continued under the ink out condition.
Five flashes:
The FINE Cartridge cannot be
recognized.
The FINE Cartridge may not be installed properly or it may
not be compatible with this printer.
Open the Front Cover and install the FINE Cartridge properly
or install the one compatible with this printer.
If the problem is not resolved, the FINE Cartridge may be
faulty. In this case, contact your Canon service
representative.
Seven Flashes:
FINE Cartridge is not installed in the
correct position.
Make sure that each FINE Cartridge is installed in the correct
position.
Routine Maintenance
Eight flashes:
Ink absorber is almost full.
The ink absorber is becoming full.
The printer has a built-in ink absorber to hold the ink used
during Print Head Cleaning.
Press the
RESUME/CANCEL
button to cancel the error so you
can continue printing. Before the ink absorber becomes
completely full, contact a Canon service representative. (You
will need to replace a particular part of the printer.)
Fourteen Flashes:
The FINE Cartridge cannot be
recognized.
The FINE Cartridge may not be compatible with this printer.
Install the appropriate FINE Cartridge.
Routine Maintenance
Fifteen Flashes:
The FINE Cartridge cannot be
recognized.
The FINE Cartridge may not be installed properly or it may
not be compatible with this printer.
Install the appropriate FINE Cartridge.
Routine Maintenance
Sixteen Flashes:
Ink level cannot be detected.
Ink may have run out.
The function for detecting the remaining ink level will be
Стр. 271 из 334 стр.Alarm Lamp Flashes Orange
Downloaded from ManualsPrinter.com Manuals