Instruction manual

61
Play and should follow the instructions to install your camera manually. [Note: If
the wizard doesn’t appear as soon as you connect your camera, you can open it
by selecting Start > Control Panel > Scanners and Cameras and then selecting
your camera.]
If you’re using a memory card reader, simply insert your card into the proper
slot and the wizard will start:
1. If the wizard asks which action you would like to perform, select “Always
do the selected action.”
2. Click “Copy pictures to a folder” and then click OK.
3. If you want to transfer all the photos in your camera (or on your memory
card), click “Next.” If you want to choose which pictures to transfer, click
“Clear All” and check the images you want to transfer (or just un-check
the check boxes next to the photos you do not want to transfer), and then
click “Next.”
4. The wizard puts your photos in the ‘My Pictures’ folder on your computer
unless you choose another location, which you should (see the section on
“Organizing Mission Photos on a Computer” below). Choose the
‘Unedited Photos’ sub-folder in the particular mission’s folder and click
“Next.”
5. When the transfer is complete, select what you want to do next and click
“Next.” If you chose nothing in the previous step, click “Finish.” The folder
that contains your newly transferred photos opens.