Instruction manual

122
Next, the Mission Pilot completes the flight planning and briefing portions of
the CAPF 104):
• Ensure your 'Route of Flight' clearly describes your intentions; include any
fuel or rest stops
• Double-check your estimated time enroute, fuel reserve and estimated
fuel burn
• Review your planning aids (marked-up charts and notes) for accuracy and
legibility
11.2 Imaging Flight Patterns
11.2.1 Types of Imaging Patterns and Use
The 4-Square imaging pattern is one of the standard imaging pattern for most
missions, as it is the simplest and most stable pattern that results in very good
photos.
The Bird’s Eye (Overview) pattern is another standard pattern that is used to
show an overview of a target or when photos need to show detail between
structures (e.g., between buildings or between trees). This pattern is also used
when the customer wants to use georeferencing.
The Circling pattern is more difficult to master, particularly if the photographer
is shooting out the right-side window. This pattern is good for taking quick shots
of multiple targets, and can be used if a quick survey of wide-spread damage is
needed by staff to determine resource needs and plan more detailed sorties.
The 45° Angle pattern is used when the customer specifically asks for these
types of photos.
See Attachments 3-7 for imaging pattern planning sheets to use on imaging
missions.
Both the Mission Pilot and the AP must be familiar with how any particular
imaging pattern will be approached and flown; that’s why planning is so essential
to a successful mission. Once you decide on which type of pattern to use, fill in all
the data you need (e.g., lat/long of all entry and turning points) to fly the pattern
using the GPS and/or VOR.