User Guide

E. Installing the Copy Tray
1. Replacing the Delivery Gear
If you are not installing a sorter or a stapler sorter to the copier, i.e., if you are using
the copy tray, you must replace the delivery gear with the gear (black) which is used for
copy tray.
If you are installing a sorter or a stapler sorter to the copier, check to make sure that
the gear is as indicated in step 1, and do NOT perform any of the steps.
COPYRIGHT © 1997 CANON INC. CANON NP6045 REV. 1 MAR. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 8 INSTALLATION
8-15
Work
Open the front door, and slide out
the fixing feeding assembly; then,
remove the fixing knob, releasing
lever, and fixing delivery cover.
Remove the E-ring, and remove the
delivery gear from the copier.
Replace the gear with the delivery
gear (black) attached to the copy
tray, and install the E-ring.
Be sure to match the groove on
the female side of the replaced
gear and the male side of the
torque limiter.
No.
1
2
Checks/remarks
E-ring
White gear
(for sorter)
Torque limiter
E-ring
Black gear
(for tray)
Torque limiter
Caution: