User Guide

2) Remove the two mounting screws r, and remove the separation roller assembly t
from the joint.
Figure 5-839
3) Remove the separation roller y from the separation roller shaft mount.
Take care not to drop the pin from the roller.
Figure 5-840
The urethane sponge used is pink immediately after foaming and changes to yellow
as time passes, faster if exposed to light; it changes from pink to orange and to
yellow, showing the general characteristics of urethane sponge; however, such
discoloration will not lower its physical properties (performance). Keep in mind that
the same type of sponge can take on different colors.
y
r
t
COPYRIGHT © 1997 CANON INC. CANON NP6045 REV. 1 MAR. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 5 PICK-UP/FEEDING SYSTEM
5-74
Caution:
Caution: