User Guide

O. Waste Toner Feeding Assembly
1) Slide out the process unit and the fixing/feeding unit from the copier. (See p. 7-17, p.
5-82.)
2) Remove the rear cover.
3) Remove the cleaner fan and the feeding fan. (See p. 7-30.)
4) Remove the high-voltage transformer PCB.
5) Remove the waste toner drive assembly together with the waste toner feeding
assembly.
6) Remove the mounting screw q, and remove the waste toner feeding screw locking
sensor w.
Figure 4-357
7) Remove the two mounting screws r, and remove the waste toner feeding assembly
t from the waste toner drive assembly.
Figure 4-358
r
t
q
w
COPYRIGHT © 1997 CANON INC. CANON NP6045 REV. 1 MAR. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 4 IMAGE FORMATION SYSTEM
4-66