Printer User Manual

Chapter 3 Registering Information 3-9
Registering
Information
Printing a List to Check Information Registered in
Your Unit
You can print the USER’S DATA LIST to check the sender information and current
settings of your unit.
Follow this procedure to print the USER’S DATA LIST:
1 Press Function.
2 Press Report.
3 Use d or u to select USER DATA LIST.
4 Press Set.
• The unit prints the USER’S DATA LIST.
The sender information is shown at the beginning of the list. The current settings of
your unit are listed after this.
****************************
****************************
*** ***
USER’S DATA LIST
1.USER SETTINGS
UNIT TELEPHONE # [phone]
UNIT NAME CANON
TX TERMINAL ID ON
TTI POSITION OUTSIDE IMAGE
TELEPHONE # MARK FAX
SCANNING CONTRAST STANDARD
OFFHOOK ALARM ON
VOLUME CONTROL
CALLING VOLUME 2
KEYPAD VOLUME 2
ALARM VOLUME 2
LINE MONITOR VOL. 2
RX CALL LEVEL HIGH
TEL LINE TYPE TOUCH TONE
27/12 2001 17:23 FAX [phone] CANON 001
PRINTING REPORT
USER DATA LIST
ACTIVITY REPORT