User Guide
Note: - If the Stop/Reset button is pressed 16 or more times, the Alarm LED (orange) or COPY button (green)
lights steadily without any changes.
- At the end of the service mode, press the ON/OFF button. To protect the media sensor from being
dislocated during transportation, the paper lifting plate of the sheet feeder unit will be raised.
<Destination settings procedures>
In the destination settings mode, press the Stop/Reset button the specified number of time(s) according to the
destination listed in the table below, and press the ON/OFF button.
Service test print
print.
2 times Green (COPY) EEPROM information
print
See 3-4. Verification Items, (2) EEPROM
information print.
3 times Orange (Alarm)
EEPROM initialization
4 times Green (COPY) Waste ink counter
resetting
5 times Orange (Alarm)
Destination settings
After entering the destination settings mode,
press the Stop/Reset button the specified
number of time(s) to select the destination. For
detail, see "Destination settings procedures"
below.
6 times Green (COPY) Print head deep
cleaning
(Cleaning of both black and color)
7 times Orange (Alarm)
Reserved
8 times Green (COPY) CD / DVD check
pattern print
Not used in servicing
9 times Orange (Alarm) CD / DVD print
position correction
(horizontal: X
direction)
Not used in servicing.
10 times Green (COPY) CD / DVD print
position correction
(vertical: Y direction)
Not used in servicing.
11 times Orange (Alarm)
Button and LCD test
12 and 13
times
Green, Orange
(COPY, Alarm)
Return to the menu
selection
14 times Green (COPY)
Left margin correction Not used in servicing.
15 times Orange (Alarm) Waste ink amount
setting
16 times or
more
Return to the menu
selection
Time(s) LED indication Destination CD / DVD print
0 times Green (COPY)
No change of the destination
1 time Orange (Alarm)
Japan
Supported
2 times Green (COPY)
Korea Not supported
3 times Orange (Alarm)
US Not supported
4 times Green (COPY)
Europe Supported
5 times Orange (Alarm)
Australia Supported
6 times Green (COPY)
1-30
download service manual and resetter printer at http://printer1.blogspot.com
Once in the service mode: Press the On/Off
button 2x after pressing the Stop button 4x.