User Guide

- Logic board ass'y (QM2-
3078)
*1
- Carriage motor (QK1-
1500)
3 times Line feed error [6000] An error occurred in the line feed signal. - Timing sensor unit (QM2-
2683)
- Timing slit disk film
(QC1-6229)
- Feed roller ass'y (QL2-
0925)
- Platen unit (QM2-2923)
- Logic board ass'y (QM2-
3078)
*1
- Paper feed motor (QK1-
1502)
4 times Purge cam sensor error
[5C00]
An error occurred in the purge unit. - Purge unit (QM2-2925)
- Logic board ass'y (QM2-
3078)
*1
5 times ASF (cam) sensor error
[5700]
This error takes place when feeding paper
from the ASF after an error occurred in the
ASF cam sensor.
- Sheet feed unit (QM2-
2916)
6 times Internal temperature error
[5400]
The internal temperature is not proper. - Logic board ass'y (QM2-
3078)
*1
7 times Waste ink absorber full
[5B00]
The waste ink absorber is full.
- Ink absorber kit (QY5-
0146)
8 times Print head temperature rise
error [5200]
The print head temperature exceeded the
specified value.
- Print head (QY6-0059)
- Logic board ass'y (QM2-
3078)
*1
9 times EEPROM error [6800] A problem occurred in writing to the
EEPROM.
- Logic board ass'y (QM2-
3078)
*1
11 times Carriage lift mechanism
error [5110]
The carriage did not move up or down
properly.
- PR lift shaft ass'y (QL2-
0936)
- Sheet feed unit (QM2-
2916)
- Logic board ass'y (QM2-
3078)
*1
- Carriage lift sensor unit
(QM2-3092)
12 times AP position error [6A00] An error occurred in the AP motor during
purging operation.
- Sheet feed unit (QM2-
2916)
- Logic board ass'y (QM2-
3078)
*1
- Purge unit (QM2-2925)
13 times Paper feed position error
[6B00]
An error occurred in the paper feed motor. - Sheet feed unit (QM2-
2916)
- Logic board ass'y (QM2-
3078)
*1
14 times Paper feed cam sensor error
[6B10]
An error occurred in the paper feed cam sensor
during paper feeding from the front paper feed
cassette.
This error is also indicated when the waste ink
counter is 60% or more, and a paper jam
occurs in the under guide.
- Sheet feed unit (QM2-
2916)
- Logic board ass'y (QM2-
3078)
*1
15 times USB Host VBUS
overcurrent [9000]
The USB Host VBUS is overloaded. - Logic board ass'y (QM2-
3078)
*1
16 times Valve sensor error [6C00] An error occurred in the valve sensor during
cleaning.
- Logic board ass'y (QM2-
3078)
*1
1-8
download service manual and resetter printer at http://printer1.blogspot.com