Service manual

Chapter 4

4-16

4.4 New SSSWs/Parameters Added to This Model

4.4.1 Service Data

0002-0681

SSSW (Service Soft Switch settings)

The items registered and set by each of these switches comprise 8-bit switches. The figure below shows which

numbers are assigned to which bits. Each bits has a value of either 0 or 1.

F-4-8

Refer to the service data menu for the details of the service switches and the initial setup values of this machine.

Because this machine does not have any new additional service data, for further details of service data, refer to the

separate volume, "G3/G4 Facsimile Service Data Service Handbook (revised ver.1)".

Below are examples showing how to read bit switch tables.

F-4-9

SW01

00000000

Bit 7

Bit 6

Bit 5

Bit 4

Bit 3

Bit 2

Bit 1

Bit 0

Service error code

Error dump list

Not used

Copy function

##300 series service error code

Not used

User setting restriction

Output

Setting possible

Function

Bit 1

Indicates that the

setting is "1".

Figures in boldface

are default settings.

Indicates that the

setting is "0".

Not Output

Yes

Not Output

Setting resrticted