User`s guide

MP730/MP700
Software Guide (Scanning)
6
4 Adjust the settings.
→ “MP Toolbox settings”
If you clicked a button other than [Save] or [File] and no application appears in [Link scanned image
to], select an application.
If you want to keep the same settings for future scans, click [Apply] before clicking [Scan].
5 Click [Scan].
When ScanGear MP is displayed
If you clicked [Use the scanner driver to make advanced settings] in Step 4, ScanGear MP will
appear.
Adjust the settings, then click [Scan].
For settings, → “Setting preferences and scanning with ScanGear MP.”
Scanning will begin.
If you clicked [Save] or [File] in step 3, a folder with the scanning date will be created in the [My
Pictures] folder in the [My Documents] folder, and your document will be saved in this folder. If there is
no [My Pictures] folder, the folder with the scanning date will be created in the [My Documents] folder
and your document saved in this folder.
If you clicked [Mail], [OCR], [File] or [Scan-1] in step 3, the scanned image will be displayed in the
application after scanning. Send the e-mail message or perform OCR conversion. (The scanned
image will not be displayed if you have not installed the applications on the MP730/700 Setup CD-
ROM or if you have not set the [Link scanned images to] setting.)
When the applications in the MP730/700 Setup CD-ROM are installed, one part will be registered in
the MP Toolbox buttons.
[OCR] ScanSoft OmniPage
[File] Presto! PageManager
[ScanGear MP] dialog box