User`s guide

MP730/MP700
Software Guide (Scanning)
3
When you scan for the first time pressing the [Scan] key, scanning will occur in the same way as when
you click the [Save] button in the MP Toolbox.
Setting up the [Scan] button to operate in a different way from the [Save] button.
1 On the Windows desktop, double-click [Canon MP Toolbox 4.1].
Alternatively, on the Windows desktop, click [Start], point to [(All) programs], [Canon], then [MP
Toolbox 4.1]. Then click [Toolbox 4.1]. The MP Toolbox will open.
2 Drag the mark over the button you want to select.
The mark will be displayed above the button you select.
To set up the [Scan] button in the [Settings] dialog box
In the MP Toolbox, click [Settings]. In the [Settings] dialog box, in [Scan Button], select the button you
want to link the [Scan] button to, then click [OK].
You can also set up the [Scan] button in the [Scanners and Cameras] dialog box (see the next page).
3
Scanning documents Scanning with the [Scan] key
Setting the scanning method for the [Scan] key