User`s guide

MP730/MP700
Software Guide (Scanning)
27
To open the [Preferences] dialog box, in the [ScanGear MP] dialog box (Advanced Mode), on the
[Settings] tab, click [Preferences].
You can adjust the following settings on the [Settings 1] tab.
[When application hides driver user interface]
Color mode cannot be changed in applications (UI off mode) such as OCR software which will not
display the ScanGear MP dialog box, and consequently the document will be scanned with the settings
in the application. To override the application settings and scan in a specific color mode, settings here.
¡¡
¡¡
[Color (documents)]
The document is scanned in this mode irrespective of the settings in the application.
¡¡
¡¡
[Text Enhanced]
The document is scanned in this mode irrespective of the settings in the application.
These settings will be invalid in UI mode (the mode in which the ScanGear MP dialog box is displayed).
Both are not selected immediately after installation.
[Preview at opening of ScanGear MP]
Select the preview operation when you open ScanGear MP.
¡¡
¡¡
[Automatically execute preview]
The preview scan will start automatically when you open ScanGear MP.
¡¡
¡¡
[Display saved preview image]
Displays the image last previewed.
Settings on the [Color] tab, and the Flip, Left and Right Rotate, Reverse Color and Ruler buttons in
the Toolbar will be reproduced.
¡¡
¡¡
[None]
The preview image will not appear when you open ScanGear MP.
[Display saved preview image] is selected immediately after installation.
3
Scanning documents Setting preferences and scanning with ScanGear MP
Advanced Mode — [Settings 1] tab settings in the [Preferences] dialog box