User`s guide

MP730/MP700

Software Guide (Scanning)

This setting is set to [None] (i.e. no reduction of dust and scratches) immediately after installation.

¡¡

[None]

For no reduction of dust and scratches.

¡¡

[Normal]

Normally this setting is recommended.

¡¡

[Soft]

For reducing small dust and scratch marks. With this setting, large dust or scratch marks may

remain.

¡¡

[Hard]

For reducing large dust and scratch marks but evidence of the reduction process may remain and

may also remove delicate parts of the image.

For scanning printed materials, the [None] setting is recommended.

If [Output Resolution] is set to less than [600] dpi and [Descreen] is selected, you cannot select

[Reduce Dust and Scratches]. (If you set [Output Resolution] to more than [601] dpi, the [Descreen]

setting will be automatically disabled and you can then set [Reduce Dust and Scratches].

This setting may not be effective for some types of photos.

[Color Settings]

Click one of the following. The default setting is [Recommended].

¡¡

[Recommended]

Vividly reproduces the tone of a document on the screen. It is recommended that you normally

select this setting.

¡¡

[Canon ColorGear Color matching]

Select to automatically match the scanner, monitor and color printer colors, thus reducing time and

trouble to manually match the monitor and printer colors.

This setting is available when [Color (photo)] or [Color (Documents)] is selected in [Color Mode].

If color matching is selected, the settings on the [Color] tab will not be available (the [Color] tab will

disappear).

[Calibration]

You cannot adjust calibration.

[Preferences]

Click to display the [Preferences] dialog box. You can adjust settings for scanning and previewing.

→ “Advanced Mode — [Settings 1] tab settings in the [Preferences] dialog box”

→ “Advanced Mode — [Settings 2] tab settings in the [Preferences] dialog box”