User`s guide

MP730/MP700
Software Guide (Scanning)
21
With the Advanced Mode Toolbar, you can make adjustments to the preview image and also select a part
of the image displayed.
To enlarge or reduce the preview image
1 On the Toolbar, click (Zoom button).
2 To enlarge, left-click on the image.
To reduce, right-click on the image.
To move the image
If the enlarged image is too large to fit on the screen, on the Toolbar, click (Move image button).
Then drag the image across the screen until the part you want to see is displayed.
You can move the image in the same way with the scroll bars.
To invert the color in the image
On the Toolbar, click (Invert button).
To flip the image
On the Toolbar, click (Mirror button).
To rotate the image
To rotate the image 90 degrees to the left, on the Toolbar, click (Rotate Left button).
To rotate the image 90 degrees to the right, on the Toolbar, click (Rotate Right button).
To show the ruler in the preview area
To display a ruler at the upper and left edges of the preview to make accurate measurements, on the
Toolbar, click (Rulers button).
To delete the preview displayed
On the Toolbar, click (Clear button). When asked to confirm, click [OK].
To detach and move the Toolbar
To detach the Toolbar from the ScanGear MP dialog box, click and hold on the edge of the Toolbar,
then drag the Toolbar. (It will return to its original position if you double-click on the title of the Toolbar.)
The Toolbar will adhere to a position if you drag it to the left or right of the preview area or the bottom
frame.
3
Scanning documents Setting preferences and scanning with ScanGear MP
Advanced Mode Toolbar