User`s guide

MP730/MP700
Software Guide (Scanning)
20
In Advanced Mode, you can adjust settings such as brightness and contrast to the preview.
1 Place the document face-down on the platen glass.
You can also place the document face-up in the ADF.
2 Select settings for [Select source], [Color Mode], [Output Resolution] and [Paper Size].
→ “Advanced Mode — [Main] tab settings”
3 Click [Preview].
4 If you want to scan only part of the document, specify the parameters.
→ “Advanced Mode – Specifying the parameters of a scan”
5 If you want to print the document at a reduced or enlarged size specify the [Print Size].
→ “Advanced Mode — [Main] tab settings”
6 If necessary, rotate or flip the image, or apply settings such as [Descreen] and [Unsharp Mask].
→ “Advanced Mode Toolbar”
→ “Advanced Mode — [Settings] tab settings”
7 If necessary, in the [Color] tab, adjust the brightness and contrast.
→ “Advanced Mode — [Color] tab settings”
8 Click [Scan].
Scanning of the image will begin.
3
Scanning documents Setting preferences and scanning with ScanGear MP
Using Advanced Mode
[ScanGear MP] (Advanced Mode) dialog box
Fax Model