User`s guide

MP730/MP700

Software Guide (Scanning)

The Simple Mode dialog box is much simpler than the Advanced Mode dialog box.

The only settings you have to adjust are where the document is placed and what type of document it is.

1 Place the document face-down on the platen glass.

You can also place the document face-up in the ADF.

2 In [Select source], select where the document was placed.

¡¡

[Platen Glass]

¡¡

[Document Feeder]

3 In [Type of original], select the document type.

¡¡

[Photo] To Scan color photos (color, 300dpi)

¡¡

[Magazine] To Scan color magazines (color,150dpi, with the Descreen function)

¡¡

[Newspaper] To Scan text and line drawings (black and white, 300dpi)

¡¡

[Document] To scan color image or text in monochrome. Especially appropriate, for scanning

high-resolution monochrome image (grayscale, 300dpi)

If you select [Photo], [Magazine] or [Document], there will be automatic color correction. (To turn off

automatic color correction, in [Advanced Mode >>], on the [Settings] tab, click [Preferences]. On the

[Settings 1] tab, clear [Always perform the auto tone].)

4 To see a preview image (provisional scan), click [Preview].

A preview of the document will be scanned and appear at the left of the dialog box.

If you placed your document in the ADF, reload it.

5 Click [Scan].

Scanning of the document will begin.

Scanning documents

Setting preferences and scanning with ScanGear MP

Using Simple Mode

[ScanGear MP] (Simple Mode) dialog box

Fax Model