User`s guide

MP730/MP700
Software Guide (Scanning)
15
To scan two or more photographs without specifying the scanning area etc., use the [Multi-Scan] setting
in ScanGear MP (Simple Mode). Each photograph becomes one single image.
1 Place the document face-down on the platen glass.
For placement of the documents, → “Scanning two or more small documents at one time.”
2 Do one of the following.
¡¡
¡¡
Use a button in the MP Toolbox
Click a button in the MP Toolbox, select [Use the scanner driver to make advanced settings], adjust
any other settings, then click [Scan].
¡¡
¡¡
Scan in an application
With Windows XP, if the system is set up for the WIA driver, switch to ScanGear MP (→ “Scanning
an image from an application”) and select the command for scanning a document in the application
(e.g. [Import], [Acquire image]. See your application documentation).
The ScanGear MP dialog box will open.
3 If the [<< Simple Mode] is displayed, click [<< Simple Mode].
4 For the fax model, in [Select source], select [Platen Glass].
5 If you wish to see a preview, click [Preview].
The document will be provisionally scanned as a preview.
6 Click [Multi-Scan].
7 Select the color mode and resolution.
¡¡
¡¡
[Color Mode]
Select from [Color], [Greyscale] and [Black and White].
¡¡
¡¡
[Resolution]
Select from [75dpi], [150dpi] and [300dpi]. The higher the number, the more detail in your image;
the lower the number, the less detail.
→ “Determining resolution”
¡¡
¡¡
[Magazine]
Suitable for scanning color magazines, with the Descreen function.
3
Scanning documents Scanning two or more small documents at one time
[Multi-Scan] in ScanGear MP (Simple Mode)