User`s guide

MP730/MP700
Software Guide (Scanning)
12
6 Click [Scan].
When ScanGear MP is displayed
ScanGear MP will open if you selected [Use the scanner driver to make advanced settings] in
step 3.
Adjust your settings, then click [Scan].
For settings, → “Setting preferences and scanning with ScanGear MP.”
As each document is scanned, the following dialog box will appear.
As you continue to scan, position the next document and click [Next]. Once scanning is
completed, click [Finish].
The above dialog box is not displayed if you have set ScanGear MP to open and in [Preferences],
selected [Automatically quit ScanGear MP after scanning] on the [Settings 1] tab in [Preferences]
in Advanced Mode on the [Settings] tab. It will also not appear if you scanned your document by
placing it in the ADF.
A folder with the scanning date will be created in the [My Pictures] folder in the [My Documents]
folder, and your document will be saved in this folder. If there is no [My Pictures] folder, the folder with
the scanning date will be created in the [My Documents] folder and your document saved in this
folder.
Even if you have selected [Color (Multi-Scan)] in [Scan mode], if you have selected [Create multiple
PDF], one PDF will be created from several documents placed on the platen glass. If you continue to
scan multiple documents, they will also be created into one PDF.
For text documents or black-and-white documents, it is recommended you select either [Black and
White] or [Grayscale] in [Scan mode].
If making a Multiple PDF with color documents ([Image quality] set to [300 dpi]), it is recommended that
the PDF have fewer than 20 pages.
[ScanGear MP] dialog box