User`s guide

95
Advanced Operations
Part 4
ex. Create the character data shown below and then use that data to produce tube segments
as shown in the example below by printing the character data from pages 2 to 4 as
follows.
1
 Press[Print].
The Print Media selection display appears.•
Acheckmark isdisplayednexttothe
currentlyselectedprintmedia.
2
 Press[
▲
]or[
▼
]toselect“Tube”,andthenpress[Enter].
The Tube size selection display appears.•
Acheckmark isdisplayednexttothe
currentlyselectedtubesize.
3
 Press[
▲
]or[
▼
]toselect“Ф3mm”,andthenpress[Enter].
The Sets to print and Range setting display appears.•
4
 Press[
▲
]or[
▼
]toselect“Setstoprint”,andthenpress[3].
If you input the wrong number by mistake, press [Back Space] to delete the number
and then input the correct number.