User`s guide

69
Advanced Operations
Part 4
 Changingthespacingbetweencharacters
The spacing between printed characters can be changed as desired. There are three possible spacings of printed
characters, as shown below. Initially, “Narrow” is selected.
The spacing between printed characters can be changed for individual pages.
ex. set the spacing between characters to “Wide”.
1
 Inputthecharacters.
2
 Press[CharSpace].
The Character Space selection display appears.•
Acheckmark isdisplayednexttothe
currentlyselectedcharacterspacing.
3
 Press[
▲
]or[
▼
]toselect“Wide”,andthenpress[Enter].
The display returns to the character input display; you can now
begin printing with the new spacing.
•
Theselectedcharacterspacingappears.
Character spacings that cannot be selected (printed)
If the segment length is specified by the user, some character spacings might not be
available, depending on the text data that is input.
•