User`s guide

44
3
 Installtheribboncassetteintheprinter.
Push the cassette in until it clicks into the place.
If the ribbon cassette is loose, the ribbon may not be detected, so be sure to press it in until
it clicks.
•
CAUTION
Do not touch the connector (metal part)
Do not hold the connection terminal (metal part) of the cassette. Doing so could cause
an improper recognition of the cassette.
4
 Installthewraparoundtapecassetteintothe
printer.
Align the tab on the wrap around tape cassette
with the hole in the printer, and then push the
cassette in until it clicks into the place.
•
Installthewraparoundtapeguide
Install the wrap around tape guide
If the wrap around tape guide has been installed, verify that it is installed correctly.
1
 Pulloutthecutter.
2
 Installthewraparoundtapeguide.
Press the guide firmly so that it hooks under the
ledge in the machine.
•
3
 Installthecutter.
To ensure correct orientation, align the “-” mark on the cutter with
the “◄” mark as shown, and insert the cutter all the way in.
•