User`s guide


Advanced Operations
Part 4
 Printingwithshortpitchwidth
By selecting "Expansion" on the Plate Printing Area selection display and selecting character size and number
of lines accordingly, the printable number of characters within the short pitch will increase.
If “Expansion” is selected on the Plate Printing Area selection display, only plates can be used as the printing media.
Printing on a plate for a narrow width terminal block.
ex. Create the following plate for 5mm wide terminal block.
Print the following 5 characters on a plate in 5mm width.
5mm
A-23
R
1
 Press[CharSize].
Press [▲] or [▼] to select [2mm 50%].•
2
 Press[SetLines].
Press [▲] or [▼] to select [2 lines].•
Acheckmark isdisplayednexttothe
currentlyselectednumberoflines.
3
 Press[SegLen].
Press [▲] or [▼] to select “Specify”.
Press [5], and then input “5”mm as the segment length.
Press [Enter].
•
•
•
segmentlengthrangethatcanbe
specified
PlatePrintingArea
Press [▲] or [▼] to select [Expansion].
Press [Enter].
•
•
If“Expansion”isselectedonthePlate
PrintingAreaselectiondisplay,only
platescanbeselectedastheprinting
media.
The message appears.
Press [Enter].
•
•
Alignment
Press [▲] or [▼] to select [Centered].
Press [Enter].
•
•
Alllinecentering
Press [▲] or [▼] to select [On].
Press [Enter].
•
•