User`s guide

88
Increasing the printing speed
You can increase the printing speed.
However, printing at a high speed can result in improper printing such as fuzzy characters depending on printer
usage environment or material of media. Check the print quality by test printing before actual printing.
1
Press [Option].
The setting display appears.•
2
Press [
◄
] or [
►
] to select “2:Print option”, and then press [Enter].
The setting display appears.•
3
Press [
◄
] or [
►
] to select “4:Printing speed”, and then press
[Enter].
4
Press [
◄
] or [
►
] to select “2:High”, and then press [Enter].
Thus, the printing speed has been increased.•
Printing speed
You can select Low, Standard, or High; however, the actual printing speed varies depending on
the media type.
Media
Tube
Transparent tube
Shrink tube
4 mm ID
Label
Wrap-around
Printing speed
setting
Low
Standard
High
Low
Standard
High
When tube
is cut
When tube
is not cut
12.5
18.5
25 20
12.5
25 20
(mm/S)
If "High" speed printing with the ambient temperature below 20
℃
results in fuzzy characters, set the printing speed to
"Standard".