User`s guide
99
Maintenance
Part 5
4
Install the new cutter.
To ensure correct orientation, align the “
-
” mark
on the cutter with the “◄” mark as shown, and
insert the cutter all the way in.
•
5
Pull out the cutter receiver.
6
Insert the new cutter receiver.
Push the cutter receiver in as far as it will go.•
7
Close the cover.
8
Turn the power switch on.
Press the “
|
” side.•
9
Return the half-cut and full-cut settings to
normal.
Replacing the cutter
Always return the half-cut and full-cut settings to normal. Otherwise, even when cutting
correctly, the cutter and cutter receiver will be subject to premature wear.