Getting Started Guide

36
2 Set Up the Machine
When you change the settings on the machine after nishing the “Setup Guide,” refer to the following
items.
Paper Size/Type:
(Main Menu) → <Additional Func.> → <Paper Settings> → Select the drawer → Select the paper size →
Select the paper type → (Main Menu) to return to the Main Menu screen. (See “Introduction of the
Machine,” in the e-Manual.)
Date and Time:
(Main Menu) → <Additional Func.> → <Timer Settings> → <Date/Time Settings> → <Current Time
Settings> → Enter the date and time → (Main Menu) to return to the Main Menu screen. (See
“Introduction of the Machine,” in the e-Manual.)
Daylight Saving Time:
(Main Menu) → <Additional Func.> → <Timer Settings> → <Date/Time Settings> → <Daylight Saving
Time Set.> → Select <On> or <O> → (Main Menu) to return to the Main Menu screen. (See
“Introduction of the Machine,” in the e-Manual.)
Telephone Number Registration:
(Main Menu) → <Additional Func.> → <Communications Settings> → <Fax Settings> → <User
Settings> → <Register Unit Telephone #> → Enter the telephone number, then <Register> → (Main
Menu) to return to the Main Menu screen. (See “Fax,” in the e-Manual.)
Unit Name Registration:
(Main Menu) → <Additional Func.> → <Communications Settings> → <Common Settings> → <TX
Settings> → <Register Unit Name> → Enter the unit name, then <Set> → (Main Menu) to return to
the Main Menu screen. (See “Fax,” in the e-Manual.)
Receive Mode:
(Main Menu) → <Additional Func.> → <Communications Settings> → <Fax Settings> → <RX
Settings> → <Reception Mode Selection> → Select the receive mode → (Main Menu) to return to the
Main Menu screen. (See “Fax,” in the e-Manual.)
Telephone Line Type:
(Main Menu) → <Additional Func.> → <Communications Settings> → <Fax Settings> → <User
Settings> → <Tel. Line Type Selection> → <Manual> → Select the telephone line type → (Main Menu)
to return to the Main Menu screen. (See “Fax,” in the e-Manual.)
Auto Gradation Correction:
(Main Menu) → <Additional Func.> → <Adjustment/Cleaning> → <Auto Gradation Correction> →
Select the correction type → Perform the correction → (Main Menu) to return to the Main Menu
screen. (See “Maintenance,” in the e-Manual.)
Network (Auto):
(Main Menu) → <Additional Func.> → <System Management Set.> → <Network Settings> → <Done>
→ <TCP/IP Settings> → <IPv4 Settings> → <IP Address Settings> → <Obtain Automatically> → <DHCP> →
Enter the IP address → Enter the subnet mask → Enter the gateway address number → (Main Menu)
to return to the Main Menu screen. → Turn OFF the main power → Restart the machine. (See “Network
Settings,” in the e-Manual.)
●
●
●
●
●
●
●
●
●
Change the Settings