Specifications

5. Recording Media Drive
5-1 Recording media:
5-2 Recording media
access indicator:
5-3 Read error warning:
5-4 Card formatting:
5-5 “No CF” card warning:
5-6 Recording functions:
(1) CF card (2) SD/SDHC memory card
• Accepts CF card Types I and II.
• Compatible with 2 GB and larger cards (Not compatible with SDXC memory cards.).
• High-speed writing with UDMA CF cards.
• With WFT-E2 II A or WFT-E2/E2A (Firmware Ver. 2.0.0 or higher), recording to
external media is possible.
• If an Eye-Fi Card is used, Auto power off cannot be disabled during image
transfers through wireless LAN.
Access lamp lights/blinks
The respective error message is displayed in the viewfinder, on the top
LCD panel, and on the LCD monitor. The shutter release also locks.
Enabled
• Low-level formatting with SD/SDHC memory card also enabled.
• External recording media cannot be formatted via WFT-E2 II A or WFT-E2/E2A (with
firmware Ver. 2.0.0 or higher).
Provided
With the CF card, SD/SDHC memory card, and external media, the following
recording functions can be used:
(1) Standard
• No automatic switching of recording media.
(2) Automatic switching of recording media
• When the current recording media becomes full, it switches to another
recording media automatically and continues recording.
(3) Separate recording
• Set the desired image size (L, M1, M2, S, RAW, M-RAW, S-RAW) for each
recording media before shooting.
• The image size set for one captured image will be applied to all the recording media.
(4) Recording of identical images
• The same image is recorded to all recording media. (Also possible with
RAW+JPEG.)
• Movies cannot be recorded simultaneously to multiple recording media.
• If simultaneous recording has been set, movies will be recorded to the
recording media set with [Play] on the [Recording func+media/folder sel.] screen.
• If a still photo is taken during movie shooting and (3) or (4) has been set, the still
photo will be recorded to each recording media in the image size that was set.
101
V. SPECIFICATIONS