LSV3_Serial_codes

8.4 Input Mode Read Command
Command “CR1” [CR]
Detail Get selected Input No.
Acceptable “%1” [CR]
%1
”1” = Computer is selected
“3” = Video is selected
Response
Unacceptable “?” [CR]
8.5 Lamp Time Read Command
Command “CR3” [CR]
Detail Get total lamp running hours.
Acceptable “%1” [CR]
%1
Show as 4 digits
Ex.: “0410”[CR] Æ410 hours
Response
Unacceptable “?” [CR]
8.6 Setting Read Command
Command “CR4” [CR]
Detail Get setting status for screen such as Ceiling/Rear.
Acceptable “%1” [CR]
%1
“11” [CR] = Normal Screen Setting
“10” [CR] = Rotation around the horizontal setting (Rear＆
Ceiling ON)
“01” [CR] = Rotation around the horizontal setting Rear ON)
“00” [CR] = Vertical and right-and left (four directions)
reversal setting (status: Ceiling ON
)
Response
Unacceptable “?” [CR]
Page 20/21