LV-7575 Expand Serial Command Functional Specifications

LV-7575 Expand Serial Command Functional Specifications
42/71
9.4.14 CR_IMGGMD Command
Command “CR_IMGGMD” [CR]
Details Get setting status of Standard/Real/Cinema in Image Gamma
Acceptable “000_%1” [CR]
%1
“STDPC” -------------------------------- Standard (PC)
“STDAV” -------------------------------- Standard (AV)
“REL” ------------------------------------ High contrast
“CNM” ---------------------------------- Cinema
Response
Unacceptable “?” [CR]
9.4.15 CR_APCTRL Command
Command “CR_APCTRL” [CR]
Details Get setting status of Auto Picture Control
Acceptable “000_%1” [CR]
%1
“L1” ------------------ Operate Auto Picture Control with Level1
“L2” ------------------ Operate Auto Picture Control with Level2
“OFF” --------------- Set Auto Picture Control OFF
Response
Unacceptable “?” [CR]
9.5 PC Adjust Status Read Command
9.5.1 CR_FSYNC Command
Command “CR_FSYNC” [CR]
Details Get value of Fine Sync
Acceptable “000_%1” [CR]
%1 “0000 – 0031”
Response
Unacceptable
“Error Code” [CR] --- When command is not available in the given
condition (such as being selected input)
“?” [CR] --- When unknown command is received
9.5.2 CR_TDOTS Command
Command “CR_TDOTS” [CR]
Details Get value of Total Dots
Acceptable “000_%1” [CR]
%1
“mmmm” – “nnnn”
(mmmm = Display area H + Position H)
(nnnn = Maximum value less than 140 MHz of Dot Clock)
Response
Unacceptable
“Error Code” [CR] ------------------------ When command is not
available in the given condition (such as being selected input
“?” [CR] ------------------- When unknown command is received
9.5.3 CR_CLPPHASE Command
Command “CR_CLPPHASE” [CR]
Details Get value of Clamp Phase value
Acceptable “000_%1” [CR]
%1 “0001 – 0255”
Response
Unacceptable “Error Code” [CR]