LV-7575 Expand Serial Command Functional Specifications

LV-7575 Expand Serial Command Functional Specifications
41/71
9.4.10 CR_COLTEMP Command
Command “CR_COLTEMP” [CR]
Details Get Color Temperature setting status
Acceptable “000_%1” [CR]
%1
“000” --------------------------------- Xlow
“001” --------------------------------- Low
“002” --------------------------------- Mid
“003” --------------------------------- High
“BLANK” ---- OSD Menu is blank
(Neither of Xlow / Low / Mid / High)
Response
Unacceptable “?” [CR]
9.4.11 CR_NZRED Command
Command “CR_NZRED” [CR]
Details Get Noise Reduction setting status
Acceptable “000_%1” [CR]
%1
“OFF” ----------------------------- Cancel Noise Reduction
“L1” -------------------------------- Noise Reduction L1
“L2” -------------------------------- Noise Reduction L2
Response
Unacceptable “?” [CR]
9.4.12 CR_PROGV Command
Command “CR_PROGV” [CR]
Details Get Progressive scan setting status
Acceptable “000_%1” [CR]
%1
“ON” ------------------------------ Set Progressive scan On
“FILM” ----------------------------- Select FILM mode
“OFF” -------------------------------- Set Progressive scan Off
Response
Unacceptable “?” [CR]
9.4.13 CR_IMAGE Command
Command “CR_IMAGE” [CR]
Details Get image setting status
Acceptable “000_%1” [CR]
%1
“STANDPC” -------------------------------- Standard (PC)
“STANDAV” -------------------------------- Standard (AV)
“REAL” ------------------------------------ High contrast
“CINEMA” ---------------------------------- Cinema
“CUSTOM1” ------------------------------- “Image1”
“CUSTOM2” ------------------------------- “Image2”
“CUSTOM3” ------------------------------- “Image3”
“CUSTOM4” ------------------------------- “Image4”
“CUSTOM5” ------------------------------- “Image5”
“CUSTOM6” ------------------------------- “Image6”
“CUSTOM7” ------------------------------- “Image7”
“CUSTOM8” ------------------------------- “Image8”
“CUSTOM9” ------------------------------- “Image9”
“CUSTOM10” ----------------------------- “Image10”
Response
Unacceptable
“Error Code” [CR] ------------------------ When command is not
available in the given condition (such as being selected input
“?” [CR] --------------------------- When unkown command is received