LV-7575 Expand Serial Command Functional Specifications

LV-7575 Expand Serial Command Functional Specifications
31/71
8.7.3 CF_KEYSTONE Command
Command “CF_KEYSTONE _%1” [CR]
%1
“UP” ------------- Correct Keystone distortion to reduce upper part of image
“FUP” ----------- Correct Keystone distortion to reduce upper part largely
“DN” ------------- Correct Keystone distortion to reduce lower part of image
“FDN” ----------- Correct Keystone distortion to reduce lower part largely
“LEFT” ---------- Correct Keystone distortion to reduce left part of image
“FLFT” ---------- Correct Keystone distortion to reduce left part largely
“RIGHT” -------- Correct Keystone distortion to reduce right part of image
“FRGT” --------- Correct Keystone distortion to reduce right part largely
“RST” ------------ Set Keystone OFF
Details
Change level of Keystone distortion correction (Available only in the normal
Power ON status).
When reached the limit of the correction level, projector accepts the command
but does not execute it.
Receiving this command immediately invokes the operation.
When trying to set the value beyond available range, error code “201” is
returned and the operation is not executed.
Example 1: When the correction level of the right part has reached its upper
limit and then the command “RIGHT” is received
Example 2: When the upper part correction allows only another step, and then
the command “FUP” is received.
Acceptable “000” [CR]
Response
Unacceptable “Error Code” [CR]
8.7.4 CF_KYSTNMODE Command
Command “CF_KYSTNMODE _%1” [CR]
%1
“STR” --------- Set Keystone store mode to Store
“RST” --------- Set Keystone store mode to Reset
Details Set Keystone store mode (Available only in the normal Power ON status)
Acceptable “000” [CR]
Response
Unacceptable “Error Code” [CR]
8.7.5 CF_ANAMORPHIC Command
Command “CF_ANAMORPHIC _%1” [CR]
%1
“ON” --------- Set Anamorphic to ON.
“OFF” -------- Set Anamorphic to OFF.
Details
Set ON/OFF of Anamorphic (Available only in the normal Power ON status).
When Anamorphic is set to ON, Aspect Ratio is forced to convert from 16:9 to
4:3 in any Screen mode.
When Anamorphic is set to OFF, it depends on Screen Mode.
Acceptable “000” [CR]
Response
Unacceptable “Error Code” [CR]
8.8 Lamp Command
8.8.1 CF_LAMPH Command
Command “CF_LAMPH_%1” [CR]
%1 “RST”
Details Reset lamp running time (Available only in the normal Power ON status)
Acceptable “000” [CR]
Response
Unacceptable “Error Code” [CR]