LV-7575 Expand Serial Command Functional Specifications

LV-7575 Expand Serial Command Functional Specifications
27/71
8.6 Input Control Command
8.6.1 CF_INPUT Command
Command “CF_INPUT_%1” [CR]
%1
“1”------------------------- Select Input 1 (not switching Source)
“2”------------------------- Select Input 2 (not switching Source)
“3”------------------------- Select Input 3 (not switching Source)
“4”------------------------- Select Input 4 (Network viewer)
“UP”---------------------- Increment Input No. by 1
<with LV-NI02 attached>Input1→Input2→Input3→Input4→Input1→ - - -
<with LV-NI02 unattached>Input1→Input2→Input3→Input1→ - - -
“DN”---------------------- Decrement Input No. by 1
<with LV-NI02 attached>Input1→Input2→Input3→Input4→Input1→ - - -
<with LV-NI02 unattached>Input1→Input2→Input3→Input1→ - - -
Details
Select Input (Available only in the normal Power ON status)
This command switches only Input No, not Source. For instance, when Input 1
has been selected, receiving the command to select Input 1 does not invoke
souce-switching operation. That means it operates differently from “INPUT”
button of Projector or Remote Control.
*When selecting Input4 on a projector with LV-NI02 unattached, it comes to “103”.
*When selecting Input1 on a projector with LV-NI02 attached and power OFF, It
comes to “101”.
*When selecting Input1 on a projector with Input1 set to Monitor Out, it comes to
“101”.
Acceptable “000” [CR]
Response
Unacceptable “%%%” [CR]
8.6.2 CF_SOURCE Command
Command “CF_SOURCE_%1” [CR]
Input 1
“DIGITAL” -------------- Select RGB (PC Digital) Input
“ANALOG” ------------- Select RGB (PC Analog) Input
“SCART” --------------- Select RGB (Scart) input
“HDCP” ----------------- Select RGB (AV HDCP) input
“UP” -------------------- Select in PC Analog → Scart → PC Digital →
AV HDCP → PC Analog order
“DN” ---------------------- Select in PC Analog → AV HDCP → PC
Digital → Scart → PC Analog order
Input 2
“VIDEO” ----------------- Select Video input
“YPBPR”----------------- Select Y,Pb/Cb,Pr/Cr input
“ANALOG” -------------- Select RGB input
“UP” ---------- Select in VIDEO → YPBPR → RGB → VIDEO order
“DN” ---------- Select in VIDEO → RGB → YPBPR → VIDEO order
Input 3
“VIDEO” ---------------Select Video input
“S-VIDEO” -------------- Select S-Video input
“YPBPR” --------------- Select Y,Pb/Cb,Pr/Cr input
“UP” ------- Select in VIDEO → YPBPR → S-VIDEO → VIDEO order
“DN” ------ Select in VIDEO → S-VIDEO → YPBPR → VIDEO order
%1
Input 4
“NETWORK”, “UP”, “DN”
*Input can not be selected, but above parameter is processed as
Acceptable.
Details
Select Source of currently selected Input (Available only in the normal Power ON
status)
When selected input does not include specified %1, error code “101” is returned and
it is not executed.
When Input No is 4 and LV-NI02 power is OFF, error code “101” is returned.
Acceptable “000” [CR]
Response
Unacceptable “%%%” [CR]