LV-7575 Expand Serial Command Functional Specifications

ManualsBrandsCanon ManualsProjectorLV-7575

EXPAND SERIAL COMMAND

FUNCTIONAL SPECIFICATIONS

LV-7575

Summary of content (71 pages)

PAGE 1
EXPAND SERIAL COMMAND FUNCTIONAL SPECIFICATIONS LV-7575
PAGE 2
LV-7575 Expand Serial Command Functional Specifications Contents 1． Overview ...................................................................................................................... 9 2． Serial Interface Specification ..................................................................................... 9 2.1 Transfer Specification............................................................................................... 9 2.2 Connection ....................................................
PAGE 3
LV-7575 Expand Serial Command Functional Specifications 8.4.9 CF_NZRED Command ...................................................................................... 20 8.4.10 CF_PROGV Command ................................................................................... 20 8.4.11 CF_IMAGE Command..................................................................................... 21 8.4.12 CF_IMAGEADJ Command ............................................................................. 21 8.4.
PAGE 4
LV-7575 Expand Serial Command Functional Specifications 8.10 Setting Command.................................................................................................. 33 8.10.1 CF_BACKGND Command .............................................................................. 33 8.10.2 CF_DISP Command ........................................................................................ 33 8.10.3 CF_LOGO Command......................................................................................
PAGE 5
LV-7575 Expand Serial Command Functional Specifications 9.5 PC Adjust Status Read Command ......................................................................... 42 9.5.1 CR_FSYNC Command...................................................................................... 42 9.5.2 CR_TDOTS Command...................................................................................... 42 9.5.3 CR_CLPPHASE Command .............................................................................. 42 9.5.
PAGE 6
LV-7575 Expand Serial Command Functional Specifications 9.9.4 CR_LAMPMODE Command ............................................................................. 52 9.9.5 CR_LAMPSTS Command................................................................................. 52 9.9.6 CR_PROJH Command...................................................................................... 53 9.9.7 CR_HMLAMP Command .................................................................................. 53 9.
PAGE 7
LV-7575 Expand Serial Command Functional Specifications 9.12.14 CR_PFAIL07 Command................................................................................ 61 9.12.15 CR_PFAIL08 Command................................................................................ 61 9.12.16 CR_PFAIL09 Command................................................................................ 61 9.12.17 CR_PFAIL10 Command................................................................................ 61 9.12.
PAGE 8
LV-7575 Expand Serial Command Functional Specifications 9.12.54 CR_PFAIL47 Command................................................................................ 69 9.12.55 CR_PFAIL48 Command................................................................................ 69 9.12.56 CR_PFAIL49 Command................................................................................ 69 9.12.57 CR_PFAIL50 Command................................................................................ 69 9.12.
PAGE 9
LV-7575 Expand Serial Command Functional Specifications 1． Overview ・ This Functional Specification defines communication with LV-NI02 for LV-7575. ・ Supporting Farmware Ver. 1.x of the projector. ・ Commands in this document are to communicate with LV-NI02, but most commands are used to control a projector remotely from a computer with RS-232C. Therefore commands in this document are defined as Expand Serial Commands. 2． Serial Interface Specification 2.
PAGE 10
LV-7575 Expand Serial Command Functional Specifications 3． Notes for communication ・ Expand Serial Command is defined as a single command per line that starts with “C” and ends with carriage return (0x0D). ・ There are two types of commands; Functional Execution Commands and Status Read Command.
PAGE 11
LV-7575 Expand Serial Command Functional Specifications 5． Functional Execution Command Table 5.
PAGE 12
LV-7575 Expand Serial Command Functional Specifications 5.4 Screen Control Command Table Execute command CF_SCREEN_%1 [CR] CF_DZCENT _%1 [CR] CF_KEYSTONE _%1 [CR] CF_KYSTNMODE _%1 [CR] Item Select Screen size Cancel Digital Zoom mode Set Keystone correction Set Keystone store mode 5.5 Lamp Command Table Execute command CF_LAMPH_%1 [CR] CF_LAMPMODE_%1 [CR] Item Reset total running time for each lamp Select Lamp mode 5.
PAGE 13
LV-7575 Expand Serial Command Functional Specifications 6． Status Read Command Table 6.
PAGE 14
LV-7575 Expand Serial Command Functional Specifications 6.
PAGE 15
LV-7575 Expand Serial Command Functional Specifications 6.
PAGE 16
LV-7575 Expand Serial Command Functional Specifications 7． Error Code Table Error Code ? 000 Contents -When the received data cannot be decoded -Parameter decignation error (wrong digit number, including invalid value, etc.) Normal reception (This is “Not” error) 103 Directly specified value or values are out of range.
PAGE 17
LV-7575 Expand Serial Command Functional Specifications 8． Functional Execution Command 8.1 Format 1) PC issues commands in format as below: Pattern1: “CF_ COMMAND” [CR] Pattern2: “CF_ COMMAND _” %1 [CR] CF_: Header COMMAND: String %1: Parameter (String) _: Space (To separate COMMAND and Parameter) 2) The projector decodes the received command and when it is ready to receive the next command, it returns the response.
PAGE 18
LV-7575 Expand Serial Command Functional Specifications 8.4 Image Command 8.4.
PAGE 19
LV-7575 Expand Serial Command Functional Specifications 8.4.5 CF_SHARP Command Command %1 Details Response “CF_SHARP_%1” [CR] “000-031”--------------- Directly specify setting value of Sharpness “UP”--------------------- Increment setting value of Sharpness by 1 “DN”--------------------- Decrement setting value of Sharpness by 1 Set user controlled value of Sharpness (Available only in the normal Power ON status) The value set by this command will not be stored in the projector’s memory.
PAGE 20
LV-7575 Expand Serial Command Functional Specifications 8.4.8 CF_COLTEMP Command Command %1 Details Response “CF_COLTEMP_%1” [CR] “000” ------------------------------ Xlow “001”------------------------------- Low “002”------------------------------- Mid “003”------------------------------- High Set Color Temperature (Available only in the normal Power ON status) The value set by this command will not be stored in the projector’s memory.
PAGE 21
LV-7575 Expand Serial Command Functional Specifications 8.4.
PAGE 22
LV-7575 Expand Serial Command Functional Specifications 8.4.13 CF_APCTRL Command Command %1 Details Response “CF_APCTRL_%1” [CR] “L1” ------------------- Set Auto Picture Control to Level 1. “L2” ------------------- Set Auto Picture Control to Level 2. “OFF” ---------------- Set Auto Picture Control OFF.
PAGE 23
LV-7575 Expand Serial Command Functional Specifications 8.5.
PAGE 24
LV-7575 Expand Serial Command Functional Specifications 8.5.
PAGE 25
LV-7575 Expand Serial Command Functional Specifications 8.5.8 CF_SETPCADJ Command Command %1 Details Response “CF_SETPCADJ_%1” [CR] None “EXT11-60” 1. Apply value set in PC Adjust Menu to projected image. Specifing setting value directly in the following PC Adjust related commands immediately reflects them on projected image, while issuing this command after these commands also triggers the reflection.
PAGE 26
LV-7575 Expand Serial Command Functional Specifications 8.5.
PAGE 27
LV-7575 Expand Serial Command Functional Specifications 8.6 Input Control Command 8.6.1 CF_INPUT Command Command %1 Details Response “CF_INPUT_%1” [CR] “1”------------------------- Select Input 1 (not switching Source) “2”------------------------- Select Input 2 (not switching Source) “3”------------------------- Select Input 3 (not switching Source) “4”------------------------- Select Input 4 (Network viewer) “UP”---------------------- Increment Input No.
PAGE 28
LV-7575 Expand Serial Command Functional Specifications 8.6.
PAGE 29
LV-7575 Expand Serial Command Functional Specifications 8.6.
PAGE 30
LV-7575 Expand Serial Command Functional Specifications 8.7 Screen Control Command 8.7.
PAGE 31
LV-7575 Expand Serial Command Functional Specifications 8.7.
PAGE 32
LV-7575 Expand Serial Command Functional Specifications 8.8.
PAGE 33
LV-7575 Expand Serial Command Functional Specifications 8.10 Setting Command 8.10.1 CF_BACKGND Command Command %1 Details Response “CF_BACKGND_%1” [CR] “BLUE” -------------------- Select Blue Back “USER” ------------------- Select User “BLACK” ------------------ Select Black Back “UP” ---------- Switch forward (Blue Back→User→Black Back→Blue Back) “DN” --------- Switch backward (Blue Back→Black Back→User→Blue Back) Set Screen status for no signal.
PAGE 34
LV-7575 Expand Serial Command Functional Specifications 8.10.4 CF_CEIL Command Command %1 Details Response “CF_CEIL_%1” [CR] “ON” --------------------------- Set Ceiling to ON. “OFF” ------------------------- Set Ceiling to OFF. Set/Cancel Ceiling mode.(Available only in the normal Power ON status) The status set by this command is stored in EEPROM and setting remains effective even after the power is turned to ALL OFF status. Acceptable “000” [CR] Unacceptable “Error Code” [CR] 8.10.
PAGE 35
LV-7575 Expand Serial Command Functional Specifications 8.10.
PAGE 36
LV-7575 Expand Serial Command Functional Specifications 8.10.
PAGE 37
LV-7575 Expand Serial Command Functional Specifications 8.10.14 CF_PJPINCODE Command Command %1 Details “CF_PJPINCODE_%1” [CR] “0000 – 9999” ------------- Directly specify PJ PIN code Enter PIN code to cancel PIN code lock (Available only in the normal Power ON status) PIN code can not be changed. (Only PIN code lock is canceled.
PAGE 38
LV-7575 Expand Serial Command Functional Specifications 8.11.3 CF_POWER Command Command “CF_POWER_%1” [CR] “ON” ----------------------------- Power ON “OFF” --------------------------- Power OFF %1 Details Response * Issuing another command during countdown process forced countdown operation to be terminated. * Error Code is returned in some projector statuses, which indicates the command is impossible to be executed. (See [8.
PAGE 39
LV-7575 Expand Serial Command Functional Specifications 9． Status Read Command 9.1 Format 1) PC issues commands in format as below: “CR_ COMMAND” [CR] Command: String 2) When projector receives the appropriate command, it returns the required data as a string. “000_” %1 [CR] %1: Required Data (String) 3) When the received data cannot be decoded, the projector returns “?” [CR] 9.
PAGE 40
LV-7575 Expand Serial Command Functional Specifications 9.4.4 CR_TINT Command Command Details “CR_TINT” [CR] Get user controlled value of Tint Acceptable Response %1 Unacceptable “000_%1” [CR] “000 – 063” “Error Code” [CR] --- When command is not available in the given condition (such as being selected input). “?” [CR] --- When unknown command is received 9.4.
PAGE 41
LV-7575 Expand Serial Command Functional Specifications 9.4.10 CR_COLTEMP Command Command Details “CR_COLTEMP” [CR] Get Color Temperature setting status Acceptable Response %1 Unacceptable “000_%1” [CR] “000” --------------------------------- Xlow “001” --------------------------------- Low “002” --------------------------------- Mid “003” --------------------------------- High “BLANK” ---- OSD Menu is blank (Neither of Xlow / Low / Mid / High) “?” [CR] 9.4.
PAGE 42
LV-7575 Expand Serial Command Functional Specifications 9.4.14 CR_IMGGMD Command Command Details “CR_IMGGMD” [CR] Get setting status of Standard/Real/Cinema in Image Gamma Acceptable Response %1 Unacceptable “000_%1” [CR] “STDPC” -------------------------------- Standard (PC) “STDAV” -------------------------------- Standard (AV) “REL” ------------------------------------ High contrast “CNM” ---------------------------------- Cinema “?” [CR] 9.4.
PAGE 43
LV-7575 Expand Serial Command Functional Specifications 9.5.4 CR_H-POS Command Command Details “CR_H-POS” [CR] Get value of Horizontal Position Acceptable Response %1 Unacceptable “000_%1” [CR] “0000 – nnnn” (nnnn = Total Dots – Display area H) “Error Code” [CR] ------ When command is not available in the given condition (such as being selected input “?” [CR] ------------------- When unknown command is received 9.5.
PAGE 44
LV-7575 Expand Serial Command Functional Specifications 9.5.8 CR_ORGMODE Command Command Details “CR_ORGMODE” [CR] Get the original signal of current selected Mode that is set in PC Adj. When MODE1- 10 or EXT11-50 is not selected, get the current signal.
PAGE 45
LV-7575 Expand Serial Command Functional Specifications 9.5.
PAGE 46
LV-7575 Expand Serial Command Functional Specifications 9.7 Input Read Command 9.7.1 CR_INPUT Command Command Details “CR_INPUT” [CR] Get selected INPUT No. Acceptable Response %1 Unacceptable “000_%1” [CR] “1 – 4” “?” [CR] 9.7.
PAGE 47
LV-7575 Expand Serial Command Functional Specifications 9.7.5 CR_SRCINP3 Command Command Details “CR_SRCINP3” [CR] Get Source of INPUT3 Acceptable Response “000_%1” [CR] “VIDEO” ----------------------- in Video mode “S-VIDEO” -------------------- in S-video mode “YPBPR” ---------------------- in Y,Pb/Cb,Pr/Cr mode %1 Unacceptable “?” [CR] 9.7.
PAGE 48
LV-7575 Expand Serial Command Functional Specifications “D-575I” ---------------------- indicates D-575i is selected “D-480I” ---------------------- indicates D-480i is selected “D-1080PSF/24” -------- indicates D-1080psf/24 is selected “D-1080PSF/25” -------- indicates D-1080psf/25 is selected “D-1080PSF/30” -------- indicates D-1080psf/30 is selected * Error Code “101” [CR] is returned for no signal Input is Y,Pb/Cb,Pr/Cr “AUTO” ------------------ indicates Auto is selected “1080I” ------------------- i
PAGE 49
LV-7575 Expand Serial Command Functional Specifications 9.7.9 CR_MODELIST Command Command Details “CR_MODELIST” [CR] Get possible modes for Mode list Acceptable “000_%1_%2_---_%x” [CR] Error Code “101” is returned except for PC-Analog and for no signal with PC-Analog Possible modes in Mode1-10 are returned when PC-Analog signal is coming. Response “MODE1” “MODE2” “MODE3” : : “MODE8” “MODE9” “MODE10” %1 Unacceptable “Error Code” [CR] 9.7.
PAGE 50
LV-7575 Expand Serial Command Functional Specifications Unacceptable “Error Code” [CR] 9.7.14 CR_NMSLOT4 Command Command Details “CR_NMSLOT4” [CR] Get teminal information of Input4 Acceptable Response %1 Unacceptable “000_%1” [CR] “NETWORK” -------- When LV-NI02 is attached. *With LV-NI02 unattached, this command is invalid and error code “103” is returned. *With LV-NI02 attached and the power OFF, error code “101” is returned. *In models not supporting LV-NI02, error code “103” is returned.
PAGE 51
LV-7575 Expand Serial Command Functional Specifications 9.7.18 CR_IDSLOT4 Command Command Details “CR_IDSLOT4” [CR] Get ID information of Input4. This command is to determine sources possible to input. Acceptable Response %1 Unacceptable “000_%1” [CR] “13” --------------- LV-NI02 (Viewer capable) Available source: Network *With LV-NI02 unattached, this command is invalid and error code “103” is returned. *With LV-NI02 attached and the power OFF, error code “101” is returned.
PAGE 52
LV-7575 Expand Serial Command Functional Specifications 9.9 Lamp Status Read Command 9.9.1 CR_LAMPREPL Command Command Details “CR_LAMPREPL” [CR] Get information of Lamp Replacement time Acceptable Response %1 Unacceptable “000_%1” [CR] “1Y” ----------------- indicates over lamp replacement time “1N” ----------------- indicates under lamp replacement time “?” [CR] 9.9.
PAGE 53
LV-7575 Expand Serial Command Functional Specifications 9.9.6 CR_PROJH Command Command Details “CR_PROJH” [CR] Get total running time of Projector (in hours) Acceptable Response %1 Unacceptable “000_%1” [CR] “0000000 – 9999999” “?” [CR] 9.9.7 CR_HMLAMP Command Command Details “CR_HMLAMP” [CR] Get total lamp number Acceptable Response %1 Unacceptable “000_%1” [CR] “001” “Error Code” [CR] 9.10 Sound Status Read Command 9.10.
PAGE 54
LV-7575 Expand Serial Command Functional Specifications 9.11 Setting Status Read Command 9.11.1 CR_BACKGND Command Command Details “CR_BACKGND” [CR] Get setting status of Screen for no signal Acceptable Response %1 Unacceptable “000_%1” [CR] “BLUE” -------------------------------- Blue Back is selected “USER” ------------------------------- User is selected “BLACK” ------------------------------ Black Back is selected “Error Code” [CR] 9.11.
PAGE 55
LV-7575 Expand Serial Command Functional Specifications 9.11.6 CR_REAR Command Command Details “CF_REAR” [CR] Get setting status of Rear function Acceptable Response %1 Unacceptable “000_%1” [CR] “ON” --------------------------- Rear projection is enabled “OFF” ------------------------- Rear projection is disabled “Error Code” [CR] 9.11.
PAGE 56
LV-7575 Expand Serial Command Functional Specifications 9.11.10 CR_ON-STA Command Command Details “CR_ON-STA” [CR] Get setting status of Power ON Start Acceptable Response %1 Unacceptable “000_%1” [CR] “ON” -------------------------- Power ON Start is ON “OFF” ------------------------ Power ON Start is OFF “?” [CR] 9.11.
PAGE 57
LV-7575 Expand Serial Command Functional Specifications 9.11.15 CR_SECURITY Command Command Details “CR_ SECURITY” [CR] Get ON/OFF setting status of Security on menu. Acceptable Response %1 Unacceptable “000_%1” [CR] “ON” ------------ PJ/USB are locked “OFF” ----------- PJ/USB are not locked. “Error Code” [CR] 9.11.
PAGE 58
LV-7575 Expand Serial Command Functional Specifications Unacceptable “Error Code” [CR] 9.12.2 CR_PRESSURE Command Command Details “CR_PRESSURE” [CR] Get value from Air Pressure sensor. Fllowing is the formula to work out Air Pressure from the given value (“Vn” represents the value): Air Pressure (hPa) =（5*Vn / 1024 – 0.204）/ 0.00459 + 150 Obtains accuracy of +/- 2% Acceptable Response %1 Unacceptable “000_%1” [CR] “0000” – “1023” “Error Code” [CR] 9.12.
PAGE 59
LV-7575 Expand Serial Command Functional Specifications 9.12.
PAGE 60
LV-7575 Expand Serial Command Functional Specifications 9.12.10 CR_PFAIL03 Command Command Details “CR_PFAIL03” [CR] Get the item name and status of Power Failure No.3 Acceptable Response %1 Unacceptable “000_%1_%2” [CR] %1 ------ Item name of Power Failure (16-byte fixed length) %2 ------ Power status (2-byte fixed length) Power is failed: “NG” Power status is normal: “OK” “Error Code” [CR] 9.12.11 CR_PFAIL04 Command Command Details “CR_PFAIL04” [CR] Get the item name and status of Power Failure No.
PAGE 61
LV-7575 Expand Serial Command Functional Specifications 9.12.14 CR_PFAIL07 Command Command Details “CR_PFAIL07” [CR] Get the item name and status of Power Failure No.7 Acceptable Response %1 Unacceptable “000_%1_%2” [CR] %1 ------ Item name of Power Failure (16-byte fixed length) %2 ------ Power status (2-byte fixed length) Power is failed: “NG” Power status is normal: “OK” “Error Code” [CR] 9.12.15 CR_PFAIL08 Command Command Details “CR_PFAIL08” [CR] Get the item name and status of Power Failure No.
PAGE 62
LV-7575 Expand Serial Command Functional Specifications 9.12.19 CR_PFAIL12 Command Command Details “CR_PFAIL12” [CR] Get the item name and status of Power Failure No.12 Acceptable Response %1 Unacceptable “000_%1_%2” [CR] %1 ------ Item name of Power Failure (16-byte fixed length) %2 ------ Power status (2-byte fixed length) Power is failed: “NG”, Power status is normal: “OK” “Error Code” [CR] 9.12.
PAGE 63
LV-7575 Expand Serial Command Functional Specifications 9.12.24 CR_PFAIL17 Command Command Details “CR_PFAIL17” [CR] Get the item name and status of Power Failure No.17 Acceptable Response %1 Unacceptable “000_%1_%2” [CR] %1 ------ Item name of Power Failure (16-byte fixed length) %2 ------ Power status (2-byte fixed length) Power is failed: “NG”, Power status is normal: “OK” “Error Code” [CR] 9.12.
PAGE 64
LV-7575 Expand Serial Command Functional Specifications 9.12.29 CR_PFAIL22 Command Command Details “CR_PFAIL22” [CR] Get the item name and status of Power Failure No.22 Acceptable Response %1 Unacceptable “000_%1_%2” [CR] %1 ------ Item name of Power Failure (16-byte fixed length) %2 ------ Power status (2-byte fixed length) Power is failed: “NG”, Power status is normal: “OK” “Error Code” [CR] 9.12.
PAGE 65
LV-7575 Expand Serial Command Functional Specifications 9.12.34 CR_PFAIL27 Command Command Details “CR_PFAIL27” [CR] Get the item name and status of Power Failure No.27 Acceptable Response %1 Unacceptable “000_%1_%2” [CR] %1 ------ Item name of Power Failure (16-byte fixed length) %2 ------ Power status (2-byte fixed length) Power is failed: “NG”, Power status is normal: “OK” “Error Code” [CR] 9.12.
PAGE 66
LV-7575 Expand Serial Command Functional Specifications 9.12.39 CR_PFAIL32 Command Command Details “CR_PFAIL32” [CR] Get the item name and status of Power Failure No.32 Acceptable Response %1 Unacceptable “000_%1_%2” [CR] %1 ------ Item name of Power Failure (16-byte fixed length) %2 ------ Power status (2-byte fixed length) Power is failed: “NG”, Power status is normal: “OK” “Error Code” [CR] 9.12.
PAGE 67
LV-7575 Expand Serial Command Functional Specifications 9.12.44 CR_PFAIL37 Command Command Details “CR_PFAIL37” [CR] Get the item name and status of Power Failure No.37 Acceptable Response %1 Unacceptable “000_%1_%2” [CR] %1 ------ Item name of Power Failure (16-byte fixed length) %2 ------ Power status (2-byte fixed length) Power is failed: “NG”, Power status is normal: “OK” “Error Code” [CR] 9.12.
PAGE 68
LV-7575 Expand Serial Command Functional Specifications 9.12.49 CR_PFAIL42 Command Command Details “CR_PFAIL42” [CR] Get the item name and status of Power Failure No.42 Acceptable Response %1 Unacceptable “000_%1_%2” [CR] %1 ------ Item name of Power Failure (16-byte fixed length) %2 ------ Power status (2-byte fixed length) Power is failed: “NG”, Power status is normal: “OK” “Error Code” [CR] 9.12.
PAGE 69
LV-7575 Expand Serial Command Functional Specifications 9.12.54 CR_PFAIL47 Command Command Details “CR_PFAIL47” [CR] Get the item name and status of Power Failure No.47 Acceptable Response %1 Unacceptable “000_%1_%2” [CR] %1 ------ Item name of Power Failure (16-byte fixed length) %2 ------ Power status (2-byte fixed length) Power is failed: “NG”, Power status is normal: “OK” “Error Code” [CR] 9.12.
PAGE 70
LV-7575 Expand Serial Command Functional Specifications 9.12.58 CR_TEMPFAIL Command Command Details “CR_TEMPFAIL” [CR] Get the temperature inside a projector when abnormal temperature status occurs. It is possible to get the temperatures all at once when several sensors installed. Acceptable Response %1,%2,%3 Unacceptable “000_%1_%2_%3” [CR] %1 ------------------ Sensor 1 temp. %2 ------------------ Sensor 2 temp. %3 ------------------ Sensor 3 temp. e.g. “_31.5F” “_” indicates a space.
PAGE 71
LV-7575 Expand Serial Command Functional Specifications 9.12.59 CR_TEMP Command Command Details “CR_TEMP” [CR] Get the current temperature information inside a projector. It is possible to get the temperatures all at once when several sensors installed. Acceptable Response %1, %2, %3 “000_%1_%2_%3” [CR] %1 ------------------ Sensor 1 temp. (External temp.) %2 ------------------ Sensor 2 temp. (Internal temp.1) %3 ------------------ Sensor 3 temp. (Internal temp.